Lasareath's Polk Audio SDA SRS 1.2TL's

Be sure to check out my Videos on YouTube by searching for Lasareath

Click a photo to start the slide show, the description text will be bigger and easier to read.


01) This is How they looked when I got them!!!	02) Very Dirty, Material Torn, Tweeters Blown, Oh MY!!!	03) My family thought I was nuts when I brought these home!	04) Matthew S. Polk's Signature!!!! Only the SRS's get those emblems!!!	05) Those little wires are used to bind the tweeters & the mid-bass drivers together so that you can use one amp to power both speakers-	06) Torn Material, ripped Label

07) Oh I couldn't wait to get these home and start working on them!!!	08) Side panels looked like a rug or a cheap toupee	09) The Dirt was Caked on!	10) ! Before - All Drivers	11) Side-View	12) I had to lay the speaker down on their back in order to change the bottom wood plate

13) Starting to put the new wood on	14) All the new wood is on the right speaker, now it's time to put those top drivers back in!	15) Sal's POLK SRS 1.2TL's with African Padauk	16) Here's the first time I looked at the speakers with new grilles, side panels, and all the new wood!!!!	17) Isn't that wood just Luscious!!	18) Left 1.2TL with everything all new!!!

19) IMG_0064	20) IMG_0066	21) IMG_0067	22) DAMN CAT HAIR!!!!!	23) IMG_0069	41 - Lasareath at the Polk HQ in Baltimore MD

42 - Lasareath at the Polk HQ in Baltimore MD	43 - Lasareath at the Polk HQ in Baltimore MD	44 - Matthew Polk Autographing my crossover plates!!!!	45 - Note to self, next time you bring somebody to get signed you test out the marker first!	46 - I think the Gold Marker works perfectly on the original crossover plates	47 - Lasareath at the Polk HQ in Baltimore MD

48 - Lasareath at the Polk HQ in Baltimore MD	49 - Lasareath at the Polk HQ in Baltimore MD	50 - Lasareath at the Polk HQ in Baltimore MD	51 - Lasareath at the Polk HQ in Baltimore MD	52 - That's Matthew Polk on the Left & Me on the right of that 1.2TL that's in a hallway at the POLK AUDIO HQ in Baltimore MD	53 - Right Crossover Cover

54 - Left 1.2TL Crossover Plate	55 - Left 1.2TL with Matthew S. Polk Signature!!!	56 - Lasareath's 1.2TL's with Autographed Crossover Cover	57 - Modified Crossover	58 - This is my old Living room with an Ikes bookshelf on its side	59 - I tried to make new crossover plates but i didn't like their so-called Black finish - After having the new one on for a week I changed it back to the originals

60 - This is what you see when the crossover plate is off	61 - This is what you see when the crossover plate is off	62 - Extra Passive Radiators make a nice piece of art work - LOL	63 - My Old Living room, you can see a piece of my Acoustic panels behind the curtain	69 - Time to move out of my Apartment and into a House finally!!!!	70 - We have arrived at my new House, hopefully we have not killed any drivers in the trip. I laid the speakers on their backs ontop of a mattress

71 -My Cousin Vito on the Left & my childhood friend Rob helping me out carrying the 1.2TL's into my new house!	72 - I unscrewed the Passive radiator and the top two drivers so that we could use the holes as hand-holes, it really helped when carrying them	73 - Don't trip on the steps Guys!!	74 - Only a few stairs at my new house, in my apartment i had only one room for my system, in this house I will have two, one for my 2ch system and one for the Home Theater	75 - Finally the left 1.2 is in its new room. This is the smallest bedroom out of 4 bedrooms in my new house. it is bigger than my old living room!!!!	76 - Hopefully the Mid-Bass driver wires didn't fall down the cabinet

77 - Time to replace the the 2 prong electrical outlet with something better	78 - I think these will do very nicely	79 - I got a chair now i just need to unpack my Gear	80 - There we go, my gear is up and I mounted some ATS Acoustic panels, this room is much bigger, I will need more panels	81 - My system was working good but I needed a real stand, So I bought this VTI stand	82 - Top View VTI BL503 Stand with Cherry Shelves

83 - Some MIT Shotgun S1 Interconnects	84 - Top View of the Panamax 5500EX and MIT Power Cords	85 - MIT Power Cord plugged into the PS Audio Power Port Premier Electrical Outlets	86 - Front view of the VTI BL503 Stand and now I have a Backup Denon 3910 just in case the first one dies	87 - Me with my 1.2's - There not that big, I'm still Bigger!!! LOL
www. S 4 L .c o www. C A M E L I - I T - S E R V I C E S .com www. U B U Y G A S .com My YouTube Videos!